Apparently All of the new Board members want to be Perez, unbelievable!
Later Dave the Wave
YEA RIGHT>>>GORD SOUTER...not
Guys,
I have heard from somewhere (?) that very late model Amphicars
came with a rear seat bottom cushion that was two seperate throwable
flotation cushions. There seem to be two or three different groups
making interior kits at this time. I wonder if someone could offer
this type of seat bottom as an option.
Bill,
Both of my 67 Amphicars came with what's been called "the floater
seat". It's just a cushion made up from floatation foam and a vinyl
covering that matches the rest of the interior. It sits on top of a
1/4" board that's placed on top of the sound deadening panel and it
has two snaps, on little tabs, that hold it in position.
.
All cars came with spring seat rears
Floaters were optional.
over time when cars got sold many spring seats were left behind
as buyers drove of with there car and thus thrown out... to bad.
My kit are well known threw out the club
and are avail with many options
one being spring or floater or both rear bottoms.
the rear backrest is made as a complete drop in unit and now has a option
of a AMPHICARS crest in the top middle.
they are avail in the standard 4 colours.
red/white...yellow/white...apricot/white and white/grey
also can be switched around or reversed to be grey/white and white/red
making your car a bit diferent.Also a new colour which sells good is
blue/white in the blue cars as in Tom Jones car.
custom colours can also be done,,,
did one in all white with red trim... that car is going to look sharp!!!
My kits come with 2 triangle panels, 2 door panels with pouches as original,
2 rear panels
All panel are of original hardboard design with all holes in same place as
original for the clips etc.
Some one suggested using a white plastic product but our research showed
that this product will buckle and distort if exposed to the light and heat
of the Sun.
they come with ready made back rest, and ready to install seat bottoms an
backrests for front.
all wire and hog ring and foam and material for conv. curve. as will as the
trim for the top of this.
In Canada we befitted from the high US dollar and were able to sell this for
$890.00
shipping was running $75.00 reg mail... boarder crossing of this product is
no problem and not other charges we inflicted on it.
As the Us dollar falls and with material increases this will go way up in
Jan.
so here's the deal >>I will keep this price till Dec. 24/04
If you are planning on a interior send your money up now so we can get the
stock in before increases and send out when ever you are ready for it a this
price.
NEW WEB SITE TAKE A LOOK\
Gord Souter,Canadian 4 amphs,
(
www.amphicar.ca)
ORILLIA ONT.
L3V 6H4
MY new phone # is 1 705 327 2820
I buy, sell and restore Only Amphicars
over 700 different parts for sale.
Interior kits and fibreglass panels my specialty!
---
[This E-mail scanned for viruses by Declude Virus]