I used a Timken #30206 in 1982, would guess they are still around.

wick68355@aol.com wrote:

I took my front wheel assembly apart to rebuild a leaky wheel cylinder. I also took the front hub off to repack the bearings. I f found that I should replace the inner bearing. Does anybody know a Napa part number for the inner front bearing? I would like to pick one up by Monday.
Also Tommy from Tampa, I rebuilt my engine a few months ago. I removed only the engine not the transmission. I found that I had to prop the transmission up with a 2 x 4 to give me enough angle, then it slid right in.

Tim Wick
wisconsin

ATTENTION!!! The Amphicar List May be Moving in April
================================================== =====
We are currently considering moving from Yahoo to a new host. Please visit
http://www.amphicar770.com
for a preview of our potential new home. Your opinions are welcome.

THE AMPHICAR-LOVERS LIST
~~~~~~~~~~~~~~~~~~~~~~~
Before posting requests for information, please check the List
Archives:
http://www.escribe.com/automotive/amphicar/search.html
For more information about this List and other available services
visit:
http://groups.yahoo.com/group/amphicar-lovers/
To Unsubscribe from this List, just send a blank email to:

amphicar-lovers-unsubscribe@yahoogroups.com
Any other issues may be addressed to the List owner (Mike Israel) at:
amphicar770@yahoo.com

        
 ------------------------------------------------------------------------
GORDON IMPORTS INC.. The world's largest source of Amphicar parts and accessories. Visit our new website today.