Welcome to The Amphicar Lovers Digest / Forum - View Single Post

Canadian four amphs · **Re: need some help -** 03-02-2008, 05:35 AM

This is a fun area.. I get calls on this all the time..maybe a good thing to put in club newsletter.
THe Conv. top has 3 bolts at the rear that can ajust it forward or down.
The glass has 2 screw bolts at the front that ajust it up or down.
the u channel has a ajustment for angle about half way down the rear fender(good luck at getting to thaT)
IF ALL ELSE FAIL SHIMMING HAS TO BE PUT IN BEHIND THE ALM, TRIM. ALL THIS SOULD BE DONE BEFORE THE TOPmaterial IS PUT on.
I am about to start on that same project. today.
By the way.. Top frames should be put on before the side glass is installed.. If you don,t well you will find out why I say this..
GORD

	(#2 (permalink))
Canadian four amphs Amphicar Expert Status: Offline Posts: 93 Images: 7 Join Date: Nov 2005 Location: Orillia Ont.	Re: need some help - 03-02-2008, 05:35 AM This is a fun area.. I get calls on this all the time..maybe a good thing to put in club newsletter. THe Conv. top has 3 bolts at the rear that can ajust it forward or down. The glass has 2 screw bolts at the front that ajust it up or down. the u channel has a ajustment for angle about half way down the rear fender(good luck at getting to thaT) IF ALL ELSE FAIL SHIMMING HAS TO BE PUT IN BEHIND THE ALM, TRIM. ALL THIS SOULD BE DONE BEFORE THE TOPmaterial IS PUT on. I am about to start on that same project. today. By the way.. Top frames should be put on before the side glass is installed.. If you don,t well you will find out why I say this.. GORD