|
Re: Backup bilge pump: plumbing and wiring -
04-24-2008, 06:14 PM
In all my cars I run 2 pumps.
Have not had to use #2 but glad its there,
Located pumps on drivers side in front of trany,
Use a 500 gpm small auto marine unit
T int othe hose near end(exit) and put a foot valve in it,
or drill a 2ed hole and a new hose outlet.
If you have converted car to neg. ground wiring is eay and follow instrutions on pump.
\ I usually juice up fro spare spade on stater solinod. fuse it.
run to a 3 way switch. I usually put it on side beside dirver in the 3 inch round hole holding with 1 screw..
hope this helps all feel free to use in club mag.
GORD.
|