|
Re: "Emergency" Override -
12-28-2007, 08:01 PM
Hi Steve,
It sounds like one of the relays has welded its contacts together. Pull
the caps off both relays and use a contact file on the contacts to clean
them up and smooth them. This should take care of the problem. The
system isn't too complex and it's nice to keep the cars intact whenever
it's reasonable to do.
John Friese
67 White
67 Red
Steven D. Reich wrote:
> Hi-
>
> My emergency override button no longer works properly. If I hold it
> down, the car will start, but quit once I let go. However, the timing
> device still works and will allow the car to start after a minute or
> so, but the bilge blower remains on. I suspect it?s one of the relay
> units. Anyone have a guess as to which has failed, or is it something
> else. I remember I had another problem with the relays, but that
> turned out to be a grounding problem. Any thoughts would be helpful.
>
> Happy New Year to all. Swim (and drive) safely.
>
> -Steve
>
> Del Mar, CA
>
> ?64-red (AMPHICR)
>
> ?64 red (I SWIM 2)
>
>
|
Linear Mode
